commercial lasers key features ? compact excellent performance-to-price ratio low noise excellent beam quality high reliability the jdsu cdps532m is a continuous wave 10 to 50 mw 532 nm diode-pumped solid state laser in a very compact package. its head contains the laser cavity together with a beam-shaping telescope to provide a low divergence laser with excellent mode quality. the laser controller allows full control and diagnostics of the laser system. the controller provides analog and rs232 interfaces. the laser system is powered by an external 5 v direct current (dc) power supply connected to the controller. diagnostic features include laser parameters like output power, pump diode current, operating hours, and more. contr ol functions feature interlock and system status, as well as external output power control. the cdps532m laser offers an improved cavity design for longer lifetime and reliability. its simple yet elegant optical layout is especially designed for volume manufacturing. changes in mechanical design are further enhanced by new control software for optimized operating parameters. the cdps532m laser provides excellent performance for the price, and low operating costs while maintaining consistency and quality. applications ? biotechnology semiconductor instrumentation reprographics general instrumentation continuous wave 532 nm diode-pumped solid state laser cdps532m north america : 800 498-jdsu (5378) website : www.jdsu.com worldwide : +800 5378-jdsu
2 cdps532m dimensions diagram: controller (specifications in mm unless otherwise noted.) 77.34 23.88 51.94 140.64 59.95 91.92 126.38 99.70 152.40 43.69 7.62 61.47 100 5.59 4x ?3.66 4x ?2.79 air flow laser head interface 15 pin d-sub female connector
3 cdps532m dimensions diagram: laser head (specifications in mm unless otherwise noted.) heat di ss ipated fr o m thi s su rfa ce wai s t fr o nt su rfa ce 1 00 m m b eam i s p o larize d o rth ogo nal t o m ou ntin g ( >100:1 ) 5 d an g e r 4x c learan c e and c 'b o re f or #6 - 3 2 x 1. 5 c ap sc rew o n b o th t o and eb o tt om 1 5 pin hi g h den s it y d - su b co nne c t or 6 . 350 2 5 .4 00 1 9 . 050 11.11 3 1 5 . 8 7 5 1 9 . 050 38 .1 00 2 5 .4 00 50 . 800 6 . 985 90 . 6 7 8 1 0 1. 600 2 5 .4 00 1 9 . 050 1 0 .7 95 1 6 . 5 1 0 38 .1 00 pr o vi s i o n f o r ? . 3 .17 5 re g i s trati on pin s o n t o p and b o tt om su rfa c e o nl y 4x #6 - 3 2 x .2 0 d p mo del s erial n o .
specifications parameter specification optical wavelength 532 1 nm output power cdps532m-010 10 mw cdps532m-020 20 mw cdps532m-050 50 mw power stability (2 hour, 253 c) 1 <1.0% mode quality m 2 <1.2 beam diameter (1/e 2 point) 0.6 mm 10% beam divergence (full angle) <1.2 mrad polarization ratio (e-vector is vertical) >100:1 noise (rms, 20 hz to 2 mhz) <0.5% ellipticity <10% pointing stability (2 h, 25 3 c) 1 30 rad static alignment 2 beam position 0.25 mm beam angle 1.0 mrad environmental base plate temperature operating 10 to 45 c non-operating 0 to 60 c shock (11 ms duration) operating 1 g non-operating 25 g vibration (sinusoidal, 5 to 500 hz) operating 0.3 g non-operating 2 g heat sink requirements surface flatness 25 m torque specification 0.5 nm 1. after warm-up. 2. specified for bottom-down mounting; same specifications can be applied to upside-down mounting upon request. 4 4 cdps532m
5 cdps532m cooling requirements ordering information for more information on this or other products and their availability, please contact your local jdsu account manager or jdsu directly at 1-800-498-jdsu (5378) in north america and +800-5378-jdsu worldwide or via e-mail at customer.service@jdsu.com. follow these cooling recommendations when integrating the laser into an original equipment manufacturer (oem) system or application. the laser head is mounted to a heat sink for proper operation. the maximum base plate temperature is maintained below 45c. the recommended heat sink capacity at a temperature of 45 c is 12 w. the required heat sink properties are estimated with this chart (right). 0 5 10 15 10 20 30 40 50 base plate temperature (c) heat load (w) cdps532m- code output power 010 10 mw 020 20 mw 050 50 mw sample: cdps532m-010
cdps532m north america : 800 498-jdsu (5378) website : www.jdsu.com worldwide : +800 5378-jdsu all statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. however, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. the user assumes all risks and liability whatsoever in connection with the use of a product or its application. jdsu reserves the right to change at any time without notice the design, specificatio ns, function, fit or form of its products described herein, i ncluding withdrawal at any time of a product offered for sale herein. jdsu makes no representations that the products herein are free from any intellectual property claims of others . please contact jdsu for more information. jdsu and the jdsu logo are trademarks of jds uniphase corporation. other trademarks ar e the property of their respective holders. ?2006 jds uniphase corporation. all rights reserved. 10139555 rev. 003 02/06 cdps532m.ds.cl.ae compliance with regulatory requirements warranty jdsu diode-pumped solid state lasers are warranted to be free of defects in materials and workmanship for 12 months from the date of shipment, or 5,000 hours, whichever comes first. the cdps532m laser system is an oem version of a jds uniphase diode-pumped solid state laser. as such, it is intended only for integration into other equipment. the cdps532m laser does not comply with center for devices and radiological health (cdrh) standards. the customer is responsible for cdrh certification of any system that incorporates the cdps532m laser. this unit is designed and tested to comply with the following standards: electromagnetic emissions (en 50081-1) tested to standard en cispr 11:1999 + a1 electromagnetic immunity (en 61000-6-2) tested to standard en 61000-4-2 and en 61000-4-3 safety evaluation tested to standard ul 3101 and en61010-1. avoid exposure laser radiation is emitted from this aperture laser radiation avoid exposure to beam class 3b laser product (iec) class iiib laser product (cdrh) 532nm / maximum power 500 mw this laser does not comply with 21 cfr 1040 or iec 825. use only as a component 02-000760_501
|
